#ifndef PROMFGFEATENGRAVING_H
#define PROMFGFEATENGRAVING_H
/*
Creo Parametric TOOLKIT declarations related to mfg engraving sequence.
*/
#include <ProToolkit.h>
PRO_BEGIN_C_DECLS
/*============================================================================
(1) Feature element tree
PRO_E_FEATURE_TREE
|
|-- PRO_E_FEATURE_TYPE
|
|-- PRO_E_STD_FEATURE_NAME
|
|-- PRO_E_NCSEQ_TYPE
|
|-- PRO_E_MFG_OPER_REF
|
|-- PRO_E_MFG_SEQ_NUM_AXES_OPT
|
|-- PRO_E_NCSEQ_CSYS
|
|-- PRO_E_RETR_SURF
|
|-- PRO_E_MFG_SUB_SPINDLE_OPT
|
|-- PRO_E_MFG_TOOL_REF_COMPOUND
|
|-- PRO_E_MFG_TOOL_ADAPTER_NAME
|
|-- PRO_E_MFG_PARAM_SITE_NAME
|
|-- PRO_E_MFG_PARAM_ARR
|
|-- PRO_E_MFG_MACH_CRVS
| |
| |-- PRO_E_STD_CURVE_COLLECTION_APPL
| |
| |-- PRO_E_MFG_CURVE_FEAT
|
|-- PRO_E_MFG_NORM_SRFS
| |
| |-- PRO_E_STD_SURF_COLLECTION_APPL
| |
| |-- PRO_E_MFG_NORM_GEOM
|
|-- PRO_E_MFG_4_AXIS_PLANE
|
|-- PRO_E_TOOL_MTN_ARR
| |
| |-- PRO_E_TOOL_MTN
|
|-- PRO_E_MFG_START_PNT
|
|-- PRO_E_MFG_END_PNT
|
|-- PRO_E_MFG_PREREQUISITE_ARR
|
|-- PRO_E_MFG_PROCESS_REF
|
|-- PRO_E_MFG_FEAT_VIEW_NAME
|
|-- PRO_E_MFG_SIMP_REP_NAME
|
|-- PRO_E_MFG_TIME_ESTIMATE
|
|-- PRO_E_MFG_COST_ESTIMATE
|
|-- PRO_E_MFG_TIME_ACTUAL
|
|-- PRO_E_MFG_COMMENTS
===============================================================================
(2) Elements table
-------------------------------------------------------------------------------------------
Element Id Element Name Data Type Valid Values
-------------------------------------------------------------------------------------------
PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT Note-1
PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING Note-2
PRO_E_NCSEQ_TYPE Sequence Type PRO_VALUE_TYPE_INT Note-3
PRO_E_MFG_OPER_REF Operation PRO_VALUE_TYPE_SELECTION Note-4
PRO_E_NCSEQ_CSYS Sequence Csys PRO_VALUE_TYPE_SELECTION Note-5
PRO_E_RETR_SURF Retract Surface Compound Note-6
PRO_E_MFG_TOOL_REF_COMPOUND Tool Compound Note-7
PRO_E_MFG_TOOL_ADAPTER_NAME Tool Attachment PRO_VALUE_TYPE_WSTRING Note-8
PRO_E_MFG_PARAM_SITE_NAME Site Name PRO_VALUE_TYPE_WSTRING Note-9
PRO_E_MFG_PARAM_ARR Mfg Parameter Array Array Note-10
PRO_E_MFG_MACH_CRVS Machine Curves Compound Note-11
PRO_E_STD_CURVE_COLLECTION_APPL Machine Chains Chain Collection Note-12
PRO_E_MFG_CURVE_FEAT Curve Feature PRO_VALUE_TYPE_SELECTION Note-13
PRO_E_MFG_NORM_SRFS Normal Surfaces Compound Note-14
PRO_E_STD_SURF_COLLECTION_APPL Surface Selections Surface Collection Note-15
PRO_E_MFG_NORM_GEOM Normal Surface PRO_VALUE_TYPE_SELECTION Note-16
PRO_E_MFG_4_AXIS_PLANE Tool Orient Plane PRO_VALUE_TYPE_SELECTION Note-17
PRO_E_TOOL_MTN_ARR Tool Motion Array Array Note-18
PRO_E_TOOL_MTN Tool Motion Compound Note-19
PRO_E_MFG_START_PNT Start Point PRO_VALUE_TYPE_SELECTION Note-20
PRO_E_MFG_END_PNT End Point PRO_VALUE_TYPE_SELECTION Note-21
PRO_E_MFG_PREREQUISITE_ARR Prerequisite Array Array Note-22
PRO_E_MFG_PROCESS_REF Process Reference PRO_VALUE_TYPE_SELECTION Note-23
PRO_E_MFG_FEAT_VIEW_NAME View Name PRO_VALUE_TYPE_WSTRING Note-24
PRO_E_MFG_SIMP_REP_NAME Simp Rep Name PRO_VALUE_TYPE_WSTRING Note-25
PRO_E_MFG_TIME_ESTIMATE Time Estimate PRO_VALUE_TYPE_DOUBLE Note-26
PRO_E_MFG_COST_ESTIMATE Cost Estimate PRO_VALUE_TYPE_DOUBLE Note-27
PRO_E_MFG_TIME_ACTUAL Actual Time PRO_VALUE_TYPE_DOUBLE Note-28
PRO_E_MFG_COMMENTS Comments PRO_VALUE_TYPE_WSTRING Note-29
PRO_E_MFG_SEQ_NUM_AXES_OPT Number of Axes PRO_VALUE_TYPE_INT Note-30
PRO_E_MFG_SUB_SPINDLE_OPT Sub-spindle Option PRO_VALUE_TYPE_INT Note-31
===============================================================================
(3) Notes
Note-1 : PRO_FEAT_MILL
Mandatory.
Note-2 : Sequence feature name.
Optional.
Note-3 : PRO_NCSEQ_GROOVE_MILL
Mandatory.
Note-4 : Operation feature selection.
Mandatory.
Note-5 : Coordinate system datum feature. To be used as a sequence coordinate
system.
Mandatory.
Note-6 : Retract compound definition.
Please see ProMfgElemRetract.h.
Mandatory.
Note-7 : Tool reference compound definition.
Please see ProMfgElemToolRef.h.
Mandatory.
Note-8 : Tool adapter model name.
Optional.
Note-9 : Name of site with default values for manufacturing parameters.
Name is going to be ignored if site doesn't exist in the mfg model.
Optional.
Note-10 : Array of manufacturing parameters.
Please see ProMfgElemParam.h.
Mandatory.
Note-11 : Machining curves compound definition.
Mandatory.
Note-12 : Curve collection.
Mandatory if PRO_E_MFG_CURVE_FEAT is not set.
Note-13 : Curve feature selection.
Element supports multiple selections.
Mandatory if PRO_E_STD_CURVE_COLLECTION_APPL is not set.
Note-14 : Normal surfaces compound definition.
Optional.
Note-15 : Normal surfaces collection. Used for tool axis control.
Ignored for 3-axis machining.
Mandatory if PRO_E_STD_CURVE_COLLECTION_APPL is set with curves.
Note-16 : Normal surface selection. Used for tool axis control.
Ignored for 3-axis machining.
Mandatory if PRO_E_STD_CURVE_COLLECTION_APPL is set with edges.
Note-17 : Selection of datum plane or planar surface.
Mandatory for 4-axis machining (PRO_E_MFG_SEQ_NUM_AXES_OPT set to 4).
Ignored for 3-axis and 5-axis machining.
Note-18 : Array of tool motions.
Optional.
Note-19 : Tool motion compound specification. Optional.
Applicable tool motion types:
PRO_TM_TYPE_GROOVE_MILLING (please see ProMfgElemToolMtnGrooveMill.h)
PRO_TM_TYPE_FOLLOW_CURVE (please see ProMfgElemToolMtnFollowCrv.h)
PRO_TM_TYPE_GOTO_POINT (please see ProMfgElemToolMtnGotoPnt.h)
PRO_TM_TYPE_GO_DELTA (please see ProMfgElemToolMtnGoDelta.h)
PRO_TM_TYPE_GOHOME (please see ProMfgElemToolMtnGoHome.h)
PRO_TM_TYPE_CONNECT (please see ProMfgElemToolMtnConnect.h)
PRO_TM_TYPE_PLUNGE (please see ProMfgElemToolMtnLeadIn.h)
PRO_TM_TYPE_GO_RETRACT (please see ProMfgElemToolMtnGoRetr.h)
PRO_TM_TYPE_TANGENT_APPROACH (please see ProMfgElemToolMtnTanAppr.h)
PRO_TM_TYPE_TANGENT_EXIT (please see ProMfgElemToolMtnTanExit.h)
PRO_TM_TYPE_NORMAL_APPROACH (please see ProMfgElemToolMtnNormAppr.h)
PRO_TM_TYPE_NORMAL_EXIT (please see ProMfgElemToolMtnNormExit.h)
PRO_TM_TYPE_LEAD_IN (please see ProMfgElemToolMtnLeadIn.h)
PRO_TM_TYPE_LEAD_OUT (please see ProMfgElemToolMtnLeadOut.h)
PRO_TM_TYPE_HELICAL_APPROACH (please see ProMfgElemToolMtnHelAppr.h)
PRO_TM_TYPE_HELICAL_EXIT (please see ProMfgElemToolMtnHelExit.h)
PRO_TM_TYPE_RAMP_APPROACH (please see ProMfgElemToolMtnRampAppr.h)
PRO_TM_TYPE_RAMP_EXIT (please see ProMfgElemToolMtnRampExit.h)
PRO_TM_TYPE_CL_COMMAND (please see ProMfgElemToolMtnFollowCrv.h)
Applicable tool motion types for 4-axis and 5-axis machining:
PRO_TM_TYPE_ALONG_AXIS_APPROACH (please see ProMfgElemToolMtnAlongAxisAppr.h)
PRO_TM_TYPE_ALONG_AXIS_EXIT (please see ProMfgElemToolMtnAlongAxisExit.h)
Note-20 : Datum point selection. Allows to start machining at the specified
position.
Optional.
Note-21 : Datum point selection. Allows to end machining at the specified
position.
Optional.
Note-22 : Array of ids of prerequisite sequences. For information purpose only.
Please see ProMfgElemPrerequisite.h.
Optional.
Note-23 : Reference selections (part, feature, curve, surface, edge,
datum plane, axis, point, datum csys). Allows to create
additional geometry references to be used only in special process
application.
Element supports multiple selections.
Optional.
Note-24 : View name. Allows to associated specific view with a machining step.
Used only in special process application.
Optional.
Note-25 : Simplified representation name. Allows to associated specific
simplified representation with a machining step.
Used only in special process application.
Optional.
Note-26 : Time estimate. Allows to specify time estimate for the
machining step.
Used only in special process application.
Optional.
Note-27 : Cost estimate. Allows to specify cost estimate for the
machining step.
Used only in special process application.
Optional.
Note-28 : Actual time. Allows to specify actual time for the machining step.
Used only in special process application.
Optional.
Note-29 : Sequence comments.
Note-30 : Number of controlled axes (3, 4, 5).
Use 4 for machining with tool axis parallel to the plane
specified in PRO_E_MFG_4_AXIS_PLANE (applicable if work center
allows 4-axis, or 5-axis machining).
Use 5 for 5-axis machining (applicable if work center allows
5-axis machining.
Optional. 3 will be used if the element doesn't exist.
Note-31 : Type of spindle assigned to the sequence.
Values are defined by ProSubSpindleOpt.
Optional (if not defined - PRO_MFG_MAIN_SPINDLE is set
by default)
=============================================================================*/
PRO_END_C_DECLS
#endif /* PROMFGFEATENGRAVING_H */